AEC-Q100验证需要多少样品？需要多长时间（周期是多长）？
发布时间：2020-06-14 18:28:00
AEC-Q100验证通常需要考虑与第三方机构前期的沟通洽谈，要考虑试验所需硬件的定制周期(例如bHAST / HTOL / ELFR)，还需要考虑第三方机构的试验排期及实际所需测试时间，建议AEC-Q100验证的周期预留160~180days完成验证
AEC-Q100验证样品数量要求以及所需时间（周期要求）举例如下：
Test Group | | AEC-Q100H
Abbv. | Reference
Standrad | Sample
Size | Perform or not | Cycle time | Comment |
| Accelerated Environment Stress Tests | A1 | PC | JESD J-STD-020
JESD22-A113 | ≧715ea | V | 2-weeks | |
A2 | THB or HAST | JESD22-A101/A110 | 77ea*3lots | V | 1-week | 1. delamination risk assessment
2. ATE validation |
A3 | AC or UHAST | JESD22-A102/A118 | 77ea*3lots | V | 1-week | delamination risk assessment |
A4 | TC | JESD22-A104 | 77ea*3lots | V | 5-weeks | delamination risk assessment |
A5 | PTC | JESD22-A105 | 45ea*1lot | | | |
A6 | HTSL | JESD22-A103 | 45ea*1lot | V | 4-weeks | |
| Accelerated Lifetime Simulation Tests | B1 | HTOL | JESD22-A108 | 77ea*3lots | V | | |
B2 | ELFR | AEC Q100-008 | 800ea*3lots | V | | |
B3 | EDR | AEC Q100-005 | 77ea*3lots | V | | |
| Package Assembly Integrity Tests | C1 | WBS | AEC Q100-001 | 5ea*30bonds | V | 1-week | confirm Cu/Au wire firstly |
C2 | WBP | M-STD883 2011 | 5ea*30bonds | V | 1-week | confirm Cu/Au wire firstly |
C3 | SD | JESD22-B102 | 15ea*1lot | V | 1-week | |
C4 | PD | JESD22-B100
JESD22-B108 | 10ea*3lots | V | 1-week | |
C5 | SBS | AEC Q100-010 | 10ea*3lots | | | |
C6 | LI | JESD22-B105 | 5ea*1lot | | | |
| Die Fabrication Reliability Tests | D1 | EM | | | | Need to get the data from foundry | Need to get the data from foundry |
D2 | TDDB | | | |
D3 | HCI | | | |
D4 | NBTI | | | |
D5 | SM | | | |
| Electrical Verification Tests | E1 | TEST | | All | V | | |
E2 | HBM | AEC Q100-002 | Method*1lot | V | 1-week | |
E3 | CDM | AEC Q100-011 | Method*1lot | V | 1-week | |
E4 | LU | AEC Q100-004 | 6ea*1lot | V | 1-week | High temp (85C) risk is needed to evaluate |
E5 | ED | AEC Q100-009 | 30ea*1lot | V | | Performed by customer |
E6 | FG | AEC Q100-007 | | V | | Performed by customer |
E7 | CHAR | AEC Q100-003 | | V | | Performed by customer |
E9 | EMC | SAE J1752/3 | 1ea*1lot | V | 4-weeks | |
E10 | SC | AEC Q100-012 | 10ea*3lots | | | |
E11 | SSER | JESD89-1 | 3ea*1lot | | | |
ASER | JESD89-2
JESD89-3 | | |
E12 | LF | AEC Q005 | | V | | LF flow |
| Defect Screening Tests | F1 | PAT | AEC Q001 | | V | | Performed by customer |
F2 | SBA | AEC Q002 | | V | | Performed by customer
1. SPC methodology
2. control trend |
| Cavity Pakcage Integrity Tests | G1 | MS | JESD22-B104 | 39ea*3lots | | | |
G2 | VFV | JESD22-B103 | 39ea*3lots | | | |
G3 | CA | M-STD883 2001 | 39ea*3lots | | | |
G4 | GFL | M-STD883 1014 | 39ea*3lots | | | |
G5 | DROP | | 5ea*1lot | | | |
G6 | LT | M-STD883 2024 | 5ea*1lot | | | |
G7 | DS | M-STD883 2019 | 5ea*1lot | | | |
G8 | IWV | M-STD883 1018 | 3ea*1lot | | | |
| Others | | Zero Defect | AEC Q004 | | | | DPM control method provided |